- Out-of-Stock
Reference: IND05615
Brand: SCHMITH
SCHMITH red gloves
favorite favorite_borderUniversal protective gloves. Different sizes.
One-component, highly flexible adhesive in a tube.
One-component Hightec elastic adhesive is characterized by high flexibility - Shore 45, wide spectrum of adhesion, permanently elastic adhesive joint, vibration-resistant, impact-resistant, paintable (except alkyd varnishes), sandable, non-corrosive, resistant to UV radiation, weather conditions and ageing, high tensile strength, good chemical resistance, silicone-free.
Example use:
connecting concrete elements
structural bonding of wood
bonding various combinations of metal, ceramics, stone, plastics, wooden slats, decorative panels and many others
Usage:
The surfaces to be bonded must be degreased, clean and load-bearing, otherwise they must be cleaned with Beko-Allclean. Tackcon cures without foaming into a permanently elastic and sandable mass. It is acceptable to glue a slightly damp substrate. However, it may be necessary to apply a primer if the humidity is too high. A slightly damp surface accelerates the curing of the adhesive, in particular shortening the open time. If a high level of stress is expected requiring high tensile strength, the surface should be chosen as dry as possible so that the adhesive has enough time to penetrate the material structure. In this case, the adhesive should be applied to both surfaces as thinly as possible. Before gluing the parts together, the applied adhesive can be lightly sprayed with water (approx. 20 g/m²) to accelerate curing. When gluing large surfaces, the adhesive should be applied in waves for optimum consumption. Joints should be smoothed with a 1% soap solution. The product is intended for professional and industrial use only.
Practical tips:
trial bonding and strength tests should be performed before use
do not use for underwater bonding and moving joints (max. 10% relative expansion), refueling equipment and bituminous substrates
not suitable for bonding PP, PE and Teflon
after curing it can only be removed mechanically
avoid contact with skin
in the event of misuse and use contrary to the rules, any liability for the product is excluded
Reference: IND05615
Brand: SCHMITH
Universal protective gloves. Different sizes.
Reference: IND10768
Brand: STALCO
Metal squeezer for silicone masses.
Reference: IND04159
Brand: KUBALA
K-shaped rubber universal tool for spreading silicone.
Reference: IND05983
Brand: DRAGON
Easy to use, contact, fast setting solvent adhesive.
Reference: IND07378
Brand: TYTAN
Montage glue.
Reference: IND06010
Brand: DRAGON
Butaprene glue.
Reference: IND14168
Brand: CX-80
General purpose adhesive with a high viscosity modulus and high penetration capacity.
Reference: IND05831
Brand: DRAGON
Butaprene glue.